-75% KAYCOLOR Kaycolor coloring catalog PVPR 59.50€ 12.11€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. ADD
-40% KAYCOLOR Kaycolor coloring nº 1.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 10.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 12.01 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 12.11 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 12.12 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 2.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 2.10 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 3.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 4.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 4.73 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 5.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 5.00 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 6.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 6.00 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 7.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 7.00 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 7.32 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 8.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 150 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 8.00 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 8.1 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 8.32 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 9.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 9.1 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
