-40% KAYCOLOR Kaycolor coloring nº 1.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 3.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 4.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 5.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 6.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 7.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 8.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 150 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 9.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 10.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 2.10 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-75% KAYCOLOR Kaycolor coloring catalog PVPR 59.50€ 12.11€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. ADD
-61% KAYCOLOR Kaypro OXYpro scented oxidizer 10vol PVPR 7.67€ 2.42€ KayPro OxyPro Scented Oxidizer 10V 1000ml Super scented oxidizing emulsion for coloring and oxidation. Allows you to obtain a more intense color in all KAYCOLOR shades. Used appropriately, it guarantees uniform and constant coverage of gray hair. 10V Oxidizer: Darken and cover gray hair. 1000 ml ADD
-61% KAYCOLOR Kaypro OXYpro scented oxidizer 20vol PVPR 7.67€ 2.42€ KayPro OxyPro Scented Oxidizer 20V 1000ml Super scented oxidizing emulsion for coloring and oxidation. Allows you to obtain a more intense color in all KAYCOLOR shades. Used appropriately, it guarantees uniform and constant coverage of gray hair. 20V oxidizer: Tone-on-tone coloring, white coverage and/or lightening a tone. 1000 ml ADD
-61% KAYCOLOR Kaypro OXYpro scented oxidizer 30vol PVPR 7.67€ 2.42€ KayPro OxyPro Scented Oxidizer 30V 1000ml Super scented oxidizing emulsion for coloring and oxidation. Allows you to obtain a more intense color in all KAYCOLOR shades. Used appropriately, it guarantees uniform and constant coverage of gray hair. 30V oxidizer: Allows you to lighten 2 to 3 tones. 1000 ml ADD
-61% KAYCOLOR Kaypro OXYpro scented oxidizer 40vol PVPR 7.67€ 2.42€ KayPro OxyPro Scented Oxidizer 40V 1000ml Super scented oxidizing emulsion for coloring and oxidation. Allows you to obtain a more intense color in all KAYCOLOR shades. Used appropriately, it guarantees uniform and constant coverage of gray hair. 40V oxidizer: Allows you to lighten 4 to 5 tones. 1000 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 2.0 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-57% KAYCOLOR Kaypro blue bleaching powder PVPR 2.91€ 1.02€ Indicated for discoloration works of 5/6 tones, highlights, balayages and discoloration of dark pigmentation. It acts gently on the hair without altering its essential functions. Does not dry or dehydrate the scalp. The particular anti-yellow formula removes the unwanted effects of yellow discolorations allowing platinum blonde results. Indicated for all bleaching techniques. 30 g ADD
-39% KAYCOLOR Kaypro Anti-Yellow bleaching powder PVPR 21.00€ 10.49€ Anti-yellow bleaching powder, with fructose beta oligosaccharides, high hair protection, with bleaching up to 10 shades. This emulsion allows you to get the most out of discoloration while maintaining the hairs natural shine and integrity. Suitable for all bleaching techniques. 500 g ADD
-40% KAYCOLOR Kaycolor coloring nº 7.32 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 12.11 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 7.00 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 6.00 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 9.1 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
-40% KAYCOLOR Kaycolor coloring nº 12.01 PVPR 8.16€ 3.98€ KAYCOLOR (diluted 1 +1.5) Instructions for use: KAYCOLOR coloring must be mixed with KAYCOLOR oxidizing emulsion at 10, 20, 30 or 40 volumes. The 10 volume oxidizing emulsion is used to darken, tone or color bleached hair. The 20 volume emulsion is used to color tone on tone, cover gray hair and/or lighten a tone. The 30 volume oxidizing emulsion is used to lighten 2-3 tones. The 40 volume oxidizing emulsion is used to lighten 4 tones; To lighten more than 4 tones, we recommend using the super lightening ranges. Preparation: Mix in a non-metallic container one part cream and one and a half parts selected KAYCOLOR oxidizing emulsion. Application on natural hair: On dry, unwashed hair, distribute the selected mixture evenly over the width and ends of the hair, leaving it to act for approximately 25 to 30 minutes. Once the time is up, prepare the same mixture and distribute it evenly over the roots and leave it to act for 25 to 30 minutes again. Application on colored hair: On dry, unwashed hair, distribute the selected coloring mixture evenly over the roots, leaving it to act for 25 to 30 minutes. When the time is up, massage gently and evenly with a little warm water, extending the product across the entire width to the ends and leaving it to act for 5 to 10 minutes. Note: the operating times indicated for specific applications, such as perms and bleaching, must be reduced by half, in the case of super lighteners they must be doubled. Final treatment: After the posing time has elapsed, rinse the hair with plenty of seasoned water and apply a shampoo for colored hair. 100 ml ADD
